Laser-Guiding Pump
A dedicated waterjet pump for waterjet-guided laser cutting — uniform high pressure with minimal pulsation, stable up to 500 bar.
In Waterjet-Guided Laser Cutting, the water stream itself acts as an optical fiber:
it guides the laser beam without scattering while simultaneously performing the cut.
This minimises the thermal damage and oxidation that conventional laser cutting causes.
How It Works
The refractive-index difference between water and air produces total internal reflection, so the beam stays confined inside the jet along its entire working length.
| Jet diameter | 50 ~ 200 μm |
|---|---|
| Jet pressure | 100 ~ 500 bar |
| Jet length | 50 ~ 100 mm |
| Principle | Total internal reflection by refractive-index difference |
Key Advantages
01
Ultra-Precision
Fine cutting even on thick workpieces
02
Cold Cutting
No thermal deformation of the base material
03
Hard Materials
Metals, diamond, SiC and other hard-to-machine materials
04
Clean Edges
No burrs, no secondary contamination
Technical Data
| Pump type | Air-driven, bidirectional |
|---|---|
| Pressure ratio | 1 : 113 |
| Air supply pressure | 2 ~ 10 bar |
| Max. discharge pressure | 1,050 bar |
| Working discharge pressure | 100 ~ 600 bar |
| Max. flow rate | 0.8 L/min |
| Pulsation tolerance | ± 5 % |
| Pulsation monitoring | ± 2 |
| Accumulator capacity | 0.5 L |
| Orifice size | 0.05 ~ 0.08 mm |
| Electrical | AC 220V single phase |
| Control system | PLC |
| Inlet connection | 3/8" at 2 bar |
| Outlet connection | NPT 1/4" |
| Noise level | 60 dB or less |
| Control voltage | 24 VDC |
| Dimensions (L × W × H) | 650 × 820 × 770 mm |
| Weight | 100 kg |
| Water type | DI WATER |
Quotation & Consultation
Tell us your material and thickness — we will propose the right configuration.